Automatic Metal Steel Profile Cable Tray Roll Forming Machine
Equipment Technical Specifications
1.1 Equipment Technical Conditions:
1.1.1 Floor Space: 30×3×3(L×W×H)m
1.1.2 Feed Direction: left to right
1.1.3 Voltage parameters: 380V/3PH/50Hz (According to customers countries)
1.1.4 Compressed Air:
Flow Rate: 0.5m3/min
Pressure: 0.6MPa
Hydraulic Oil: 46# hydraulic oil
Gear Oil: 18# Hyperbolic gear oil
| No | Items | Technical Parameters |
| 1 | Material of Strip | Q235 |
| 2 | Width of Strip | ≤250mm |
| 3 | Thickness of Strip | ≤3mm |
| 4 | Length of Rolling | ≤5m |
| 5 | Speed of Rolling | 0m~25m/min |
| 6 | Total capacity of equipment | Around 90KW |
Products Specifications and Dimensions: Clients need provide drawings
Cable Tray Roll Forming Machine Main Components
| No | Equipment Name | Quantity | Motor Power (kw) |
| 1 | Decoiler | 1 set | |
| 2 | Forming Mill | 1 set | 19 |
| 3 | Roller Straightening Machine | 1 set | 7.5 |
| 4 | Servo Feeding Machine | 1 set | 4.4 |
| 5 | Power Transmission Rack | 1 set | 6 |
| 6 | Collection Table | 1 set | |
Production Process and Struction of Cable Tray Roll Forming Machine
Decoiler → Leveling→ Feeding→ Punch Cutting → Forming → Collection Table
Cable Tray Roll Forming Machine Performance Overview
Decoiler
Width of Strip: 500mm
Thickness of Strip: 1~2mm
Inner Diameter of coil stock: φ508mm
Outer Diameter of coil stock: φ1300mm
Max Load Capacity: 3T
Roll Forming Machine
20 Pass Forming Machine
Rolling forming Effective width ≤500 mm
Roll Diameter: φ 65 mm ,40Cr (hardening and tempering)
Main Drive Motor: 19Kw
Speed: 5~15m/min
Electric Elements Brand
| No | Items | Brand |
| 1 | PLC | Delta |
| 2 | HMI | WEINVIEW |
| 3 | Electric Elements | Schneider or Delixi |
| 4 | Bearing | HRB, WZS or LYC |
| 5 | Main Motor | Wannan motor |
| 6 | Servo Motor | Delta |
Remark:
The supplier ensures the integrity of the supply scope, in order to meet the user's installation and operation requirements as the principle, the supply requirements involved in the technical specifications also serve as a supplement to the scope of this supply. If the shortcomings are found in the installation, commissioning and operation, the supplier will supplement them. The hydraulic oil, gear oil, saw blade, cooling water tank, cable and material used in commissioning shall be provided by Buyer.
Cable Tray Roll Forming Machine Pictures
FAQ
Q: Is the cable tray roll forming machine automatic?
A:Yes, we adopt advanced automatic control software achieving information management for production.
Q: What's the material of cable tray roll forming machine rollers?
A:Our roll forming machines roller on each piece of machine is the use of Cr12 or Cr12Mov steel Qenched for each roller, the roller increases the hardness and long service life And the use of plating technology roller surface treatment to improve the equipment of the main performance.
