Aluminum Corrugated Steel Metal Roof Panel Roll Forming Making Machinery
Roof Panel Roll Forming Machine Brief Introduction
1. Advantages of roll forming machine: solid shaft, PLC control, hydraulic system, fast production speed, long service life.
2. We can design the machine according to your drawings.
3. Fast production capacity and fast delivery, and can be inspected by the third party before delivery.
4. Perfect after-sales service: our engineers can teach you how to install and operate the machine in your place. All the machine parts are available.
Working Process Flow of Roll Forming Machinery
Decoiler→ Feeding → Roll forming → Hydraulic cutting → Output table
Roll Forming Machine Technical Parameter Requirements
| Control System | PLC Delta Inverter |
| Diameter of the shaft | 70mm |
| Wall panel thickness | 18mm |
| Driving mode | Chain 1.5 inch |
| Main motor power | 4 kw |
| HydraulicPressure | 12-16MPa |
| Roller stations | 18 rows |
| Pump power | 4 kw |
| Main electrical control system | Panasonic PLC, Delta frequency changer, Delta touch screen, Omron counter |
| Frame | Welded with 350H section steel |
| 1. | Dimension | 5800*1600*1400mm |
| 2. | Weight | 7000KGS |
| 3. | Motor Power | 7.5KW*2 sets |
| 4. | Hydraulic Power | 2.2KW |
| 5. | Voltage | 380V/50HZ/3PH (according to your requirements) |
| 6. | Forming Stations | 13 |
| 7. | Forming Speed | 8-14m/min |
| 8. | Effective Width | 300mm,400mm,500mm |
| 9. | Material of Width | 470mm,575mm,680mm |
| 10. | Material of AL-Mg-Mn,Galvanized Sheet Thickness | 0.4-1.0mm |
| 11. | Material of Colored Prepainted Sheet Thickness | 0.5-0.8mm |
| 12. | Material for All Roller | high grade no.45 forged steel,plated hard chrome and polished the rollers |
Roof Panel Roll Forming Machine Components
| Item | Name | Qty |
| 1 | Manual Decoiler | 1 set |
| 2 | Feeding platform with hand cutting system | 1 set |
| 3 | Main forming system | 1 set |
| 4 | Hydraulic cutting system | 1 set |
| 5 | Hydraulic pump station | 1 set |
| 6 | Electrical motor | 1 set |
| 7 | PLC control system | 1 set |
| 8 | Touch screen operation | 1 set |
| 9 | Finished products receive table | 1 set |
| 10 | Safety shield(optional) | 1 set |
Technical Parameters of Roof Panel Roll Forming Machinery
| The machine size | Length 5500* width 1300* height 1200 |
| Machine weight | About 2.5 tons |
| The motor power | Motor:4Kw pump station: 4Kw working voltage: 380v-50hz |
| Production speed | 8-10 m/min |
| The transmission way | 1 inch chain drive |
| Feed width | 1250 mm |
| The thickness of the material | 0.1 mm to 0.8 mm |
| rack | 300 h steel |
| Molding shaft | 13 axis diameter: 70 φ |
| The thickness of the plate | 14 mm |
| Set of | Using galvanized pipe finishing, electrostatic spraying |
| Wheel material | Hard chrome plated 45# steel |
| The molding part | Divided into precision wheel rotating molding, molding effect, reduce the friction between the wheel and raw materials, debugging convenient, fast. |
| Numerical control system | Easy to control king PLC, letter jie button screen, counter |
| Cutting Device | Iron plate welding frame, hydraulic cylinder automatic shearing |
| accessories | One instruction manual and one set of feeding rack |
